• Log in with Facebook Log in with Twitter Log In with Google      Sign In    
  • Create Account
  LongeCity
              Advocacy & Research for Unlimited Lifespans

Photo
* * * * * 13 votes

PRL-8-53; was: PRL 8-147: The Most Powerful Memory Enhancer?


  • Please log in to reply
1725 replies to this topic

#1501 Nattzor

  • Guest
  • 549 posts
  • 103
  • Location:Sweden

Posted 24 November 2013 - 11:11 AM

What is the half-life of this stuff, and are there active metabolites? 3alarm, it could have been downstream effects or a buildup effect instead of a bunch of synergistic compounds together. I don't know too much about this and I'm just throwing that out there, for what its worth. I bought a little of this RLP-47-53-1 and I've got memory problems of my own, but want to wait a while before I try it out of caution.


Interesting thought actually. I'm not sure exactly. Hansl's paper did indeed mention active metabolites, I believe one of them was hydroxylated.


NOTE ADDED IN PROOF
Following completion of this study it was found that the particular lot of PRL-8-53 that had been used contained a small amount of the desmethyl compound as admixture, which may also have contributed to the observed effects. However, since this compound is considered a metabolite of the parent compound (8-53), its presence should not detract from the findings
  • like x 1

#1502 3AlarmLampscooter

  • Guest
  • 352 posts
  • 73
  • Location:Every nook and cranny... of our little town.

Posted 24 November 2013 - 07:59 PM

Ah, that's the one I was thinking of.

sponsored ad

  • Advert
Click HERE to rent this advertising spot for BRAIN HEALTH to support LongeCity (this will replace the google ad above).

#1503 middpanther88

  • Guest
  • 185 posts
  • -4

Posted 24 November 2013 - 08:12 PM

What compounds would lend themselves for these effects?

#1504 mait

  • Guest
  • 256 posts
  • 64
  • Location:Northern Europe

Posted 24 November 2013 - 09:00 PM

I ordered some Coluracetam (1g) and I will try out if there is main effects of Coluracetam alone on the scores on my WM or if Coluracetam and PRL-8-53 together have synergistic positive effect on the results across test presented on Cambridge Brain Sciences homepage.

Side note: in my case PRL-8-53 seem to have very strong effect on LT memory. While I am studding for exams I usually read through the slides and lecture notes and highlight the most important facts and concepts. The seccond and third time I go through notes and slides I only concentrate on highlighted parts of my materials. So I have pretty good intuitive feel of my usual level of memorization after initial reading of materials - while on PRL-8-53 I seem to remember much much more after reading the materials first time.

#1505 stponky

  • Guest
  • 60 posts
  • 11
  • Location:USA

Posted 24 November 2013 - 11:36 PM

So as I mentioned in my previous post, I was taking 5-10 mg of PRL every day over the past week and a half or so. I did not take any PRL Saturday and this Sunday I have had a headache all day which is pretty unusual for me. Maybe taking it every day is not the best way to go about using PRL. Other people seem to be doing quite well with it, but I thought I would mention this in case other people find the same result.

#1506 telight

  • Guest
  • 173 posts
  • 47
  • Location:USA, VA

Posted 25 November 2013 - 12:57 AM

I ordered some Coluracetam (1g) and I will try out if there is main effects of Coluracetam alone on the scores on my WM or if Coluracetam and PRL-8-53 together have synergistic positive effect on the results across test presented on Cambridge Brain Sciences homepage.

Side note: in my case PRL-8-53 seem to have very strong effect on LT memory. While I am studding for exams I usually read through the slides and lecture notes and highlight the most important facts and concepts. The seccond and third time I go through notes and slides I only concentrate on highlighted parts of my materials. So I have pretty good intuitive feel of my usual level of memorization after initial reading of materials - while on PRL-8-53 I seem to remember much much more after reading the materials first time.


May i ask where you ordered that Coluracetam from? All the vendors i know of are sold out.

Edited by telight, 25 November 2013 - 12:58 AM.


#1507 mait

  • Guest
  • 256 posts
  • 64
  • Location:Northern Europe

Posted 25 November 2013 - 08:54 AM

I ordered some Coluracetam (1g) and I will try out if there is main effects of Coluracetam alone on the scores on my WM or if Coluracetam and PRL-8-53 together have synergistic positive effect on the results across test presented on Cambridge Brain Sciences homepage.

Side note: in my case PRL-8-53 seem to have very strong effect on LT memory. While I am studding for exams I usually read through the slides and lecture notes and highlight the most important facts and concepts. The seccond and third time I go through notes and slides I only concentrate on highlighted parts of my materials. So I have pretty good intuitive feel of my usual level of memorization after initial reading of materials - while on PRL-8-53 I seem to remember much much more after reading the materials first time.


May i ask where you ordered that Coluracetam from? All the vendors i know of are sold out.


https://newmind.com/...racetam-36.html

Item was marked as backordered 2wks ago also, but got shipped 1 wk ago.

#1508 Ragin87

  • Guest
  • 4 posts
  • 2
  • Location:Canada

Posted 25 November 2013 - 12:34 PM

I ordered some Coluracetam (1g) and I will try out if there is main effects of Coluracetam alone on the scores on my WM or if Coluracetam and PRL-8-53 together have synergistic positive effect on the results across test presented on Cambridge Brain Sciences homepage.

Side note: in my case PRL-8-53 seem to have very strong effect on LT memory. While I am studding for exams I usually read through the slides and lecture notes and highlight the most important facts and concepts. The seccond and third time I go through notes and slides I only concentrate on highlighted parts of my materials. So I have pretty good intuitive feel of my usual level of memorization after initial reading of materials - while on PRL-8-53 I seem to remember much much more after reading the materials first time.


May i ask where you ordered that Coluracetam from? All the vendors i know of are sold out.


https://newmind.com/...racetam-36.html

Item was marked as backordered 2wks ago also, but got shipped 1 wk ago.


what? ordering now.

#1509 mf6lol5

  • Guest
  • 25 posts
  • 15
  • Location:Mountains

Posted 25 November 2013 - 01:17 PM

Shouldn't the people with PRL 8 153 do a placebo test with dual n back gaming?

#1510 telight

  • Guest
  • 173 posts
  • 47
  • Location:USA, VA

Posted 25 November 2013 - 03:16 PM

https://newmind.com/...racetam-36.html

Item was marked as backordered 2wks ago also, but got shipped 1 wk ago.


Thats crazy, did you receive the item yet? Was it actually Coluracetam?

#1511 mait

  • Guest
  • 256 posts
  • 64
  • Location:Northern Europe

Posted 25 November 2013 - 08:20 PM

https://newmind.com/...racetam-36.html

Item was marked as backordered 2wks ago also, but got shipped 1 wk ago.


Thats crazy, did you receive the item yet? Was it actually Coluracetam?



Haven't received my package jet (I am an European customer).

#1512 golden1

  • Guest
  • 681 posts
  • 141
  • Location:US

Posted 25 November 2013 - 08:35 PM

I got coluracetam from newmind, but before it said backordered. its real, looks same as scienceguys batch too

#1513 Ark

  • Guest
  • 1,729 posts
  • 383
  • Location:Beijing China

Posted 26 November 2013 - 11:01 AM

Anyone tried PRL 8-147 pre workout yet? If not I may get some and try it before BJJ/Sambo class.

#1514 leftside

  • Guest
  • 161 posts
  • 2
  • Location:Canada

Posted 27 November 2013 - 06:15 PM

I've been taking PRL-8-53 twice a day since Sunday. I presume I am taking 10mg with each dose as 5 measues from the supplied spoon from NSN weighs about 50mg on my scales. I am not taking any other nootropics at the moment.

I'm quite liking the results so far. I seem to be able to concentrate and focus a little better at work (I develop software). It's not a stimulant for me - and I'm not looking for a stimulant anyway. Green tea/ginseng/kola nut/yerba mate are all good enough for me. I have found some sleeping problems though, but these diminished a little if I don't have an afternoon tea. i'll keep experimenting with it over the next couple of weeks and then I'll try the IRDA-21 that I also have.

As a side note: I'm in Canada and Canada customs opened the package, but allowed it through.

Sorry: just noticed this is the PRL 8-147 thread. I'll leave my post here, but try and find the PRL-8-53 thread.

Edited by leftside, 27 November 2013 - 06:17 PM.


#1515 Nattzor

  • Guest
  • 549 posts
  • 103
  • Location:Sweden

Posted 27 November 2013 - 06:21 PM

I've been taking PRL-8-53 twice a day since Sunday. I presume I am taking 10mg with each dose as 5 measues from the supplied spoon from NSN weighs about 50mg on my scales. I am not taking any other nootropics at the moment.

I'm quite liking the results so far. I seem to be able to concentrate and focus a little better at work (I develop software). It's not a stimulant for me - and I'm not looking for a stimulant anyway. Green tea/ginseng/kola nut/yerba mate are all good enough for me. I have found some sleeping problems though, but these diminished a little if I don't have an afternoon tea. i'll keep experimenting with it over the next couple of weeks and then I'll try the IRDA-21 that I also have.

As a side note: I'm in Canada and Canada customs opened the package, but allowed it through.

Sorry: just noticed this is the PRL 8-147 thread. I'll leave my post here, but try and find the PRL-8-53 thread.


This is the PRL-8-53 thread, they just haven't changed the title, I reported it yesterday or so and asked them to.

#1516 Kyle McGill

  • Guest
  • 57 posts
  • 1
  • Location:Toronto

Posted 27 November 2013 - 06:27 PM

The continual confusion surrounding the name is getting quite hilarious at this point.
  • like x 1

#1517 megatron

  • Guest
  • 608 posts
  • 79
  • Location:Norway
  • NO

Posted 27 November 2013 - 07:58 PM

The continual confusion surrounding the name is getting quite hilarious at this point.

Couldn't agree more. Also I'm amazed by the amount of people not being able to read properly. It's IDRA-21 not IRDA-21!
  • like x 1
  • dislike x 1

#1518 golden1

  • Guest
  • 681 posts
  • 141
  • Location:US

Posted 27 November 2013 - 09:21 PM

The continual confusion surrounding the name is getting quite hilarious at this point.

Couldn't agree more. Also I'm amazed by the amount of people not being able to read properly. It's IDRA-21 not IRDA-21!

im amazed how off topic both of the threads have got..
  • like x 5
  • dislike x 1

#1519 Breezey

  • Guest
  • 55 posts
  • 7
  • Location:USA

Posted 28 November 2013 - 03:08 AM

Leftside, how long did customs hold your package?

#1520 p3x888

  • Guest
  • 133 posts
  • 16
  • Location:USA
  • NO

Posted 29 November 2013 - 10:31 PM

Would dosage for 8-53 be weight dependent? Anyone have any ideas?

#1521 Nattzor

  • Guest
  • 549 posts
  • 103
  • Location:Sweden

Posted 29 November 2013 - 10:37 PM

Would dosage for 8-53 be weight dependent? Anyone have any ideas?


The patent does say that the oral dosages range from 0.01-4mg/kg (most preferable 0.05-1.2mg/kg), the study used no such dosages however (they used 5mg for all).
  • like x 1

#1522 p3x888

  • Guest
  • 133 posts
  • 16
  • Location:USA
  • NO

Posted 29 November 2013 - 10:43 PM

Perhaps everyone chosen was all a similar size. I will start increasing my dosage to see what the effects are. I am 160 kilos so I am guessing I need more. What was the max safe dose? Thank you!

#1523 Nattzor

  • Guest
  • 549 posts
  • 103
  • Location:Sweden

Posted 29 November 2013 - 10:51 PM

Perhaps everyone chosen was all a similar size. I will start increasing my dosage to see what the effects are. I am 160 kilos so I am guessing I need more. What was the max safe dose? Thank you!


Oral LD50 860mg/kg in mice (about 70mg/kg for a 60 kg adult)
Blood pressure in dogs was not affected in a dose of 8mg/kg (4 mg/kg in humans)
Reduced motor activity in mice and rats by 50% in 160mg/kg (13 mg/kg and 26 mg/kg in human dosage)
Does not potentiate amphetamine nor have any stimulatory effects like amphetamine.
No side-effects has been reported.
Reproduction has also been studied, there was no case of malformation of any form for two generations of offsprings.
Cancer risk is unknown, but if no malformation happened with two generations born on it, I doubt there is a cancer risk.
- http://www.reddit.co.../1d40a5/prl853/


I however doubt it's needed more, your brain aint bigger because your body is.
  • like x 1

#1524 Mr. Pink

  • Guest
  • 226 posts
  • 28
  • Location:USA

Posted 01 December 2013 - 08:20 PM

Any update ScienceGuy? That was over a month ago now, and I'm getting pretty frustrated (with the situation) because my exam is next month, for which i'd like my PRL 53, which is why i paid for it last April.

UPDATE:

Hi Everyone,

Apologies for the delay in posting an update here... unfortunately due to work commitments I have had absolutely zero free time over the past week ;)

I have checked with the lab regarding how the CUSTOM SYNTHESIS is progressing and here is their reply, which is self-explanatory:

PRL preparation is at full stop because my supplier is stalling delivery of sodium cyanide which is needed at next step of preparation.

I have now about 250g of pure:
Posted Image
And good practice called for ordering sodium cyanide in excess (500g) for which there is much trouble/paperwork/scanning of documents/etc.

I need this poison to make next intermediate - 3-(carbomethoxy)phenylacetonitrile:
Posted Image
And before you ask - there will be absolutely no cyanides after this reaction in the product.

So there would be some delay, I think this poisonous reagent should arrive next week at my lab and there are 3 more steps to finished product plus final purification.


So good news and bad news everyone... The good news is that the CUSTOM SYNTHESIS is well underway... The bad news is it is going to take a bit longer than originally estimated to complete for the above reason ;)

I will be sure to post further UPDATES here as and when :)

EDIT: I should add that it is quite common for TOXIC CHEMICALS, such as SODIUM CYANIDE, to be used as REAGENTS within the CUSTOM SYNTHESIS PROCESS; wherein, what is important it that the lab used is sufficiently skilled and reputable such that no traces of said TOXIC CHEMICALS remain in the FINAL PRODUCT (which can always be confirmed via independent third party analysis) ;)



#1525 ScienceGuy

  • Life Member
  • 851 posts
  • 1,131
  • Location:UK

Posted 01 December 2013 - 08:43 PM

Any update ScienceGuy? That was over a month ago now, and I'm getting pretty frustrated (with the situation) because my exam is next month, for which i'd like my PRL 53, which is why i paid for it last April.


I will contact the lab and request an update. ;)
  • like x 1

#1526 unregistered_user

  • Guest
  • 721 posts
  • 169
  • Location:Washington DC

Posted 01 December 2013 - 08:49 PM

Any update ScienceGuy? That was over a month ago now, and I'm getting pretty frustrated (with the situation) because my exam is next month, for which i'd like my PRL 53, which is why i paid for it last April.

UPDATE:

Hi Everyone,

Apologies for the delay in posting an update here... unfortunately due to work commitments I have had absolutely zero free time over the past week ;)

I have checked with the lab regarding how the CUSTOM SYNTHESIS is progressing and here is their reply, which is self-explanatory:

PRL preparation is at full stop because my supplier is stalling delivery of sodium cyanide which is needed at next step of preparation.

I have now about 250g of pure:
Posted Image
And good practice called for ordering sodium cyanide in excess (500g) for which there is much trouble/paperwork/scanning of documents/etc.

I need this poison to make next intermediate - 3-(carbomethoxy)phenylacetonitrile:
Posted Image
And before you ask - there will be absolutely no cyanides after this reaction in the product.

So there would be some delay, I think this poisonous reagent should arrive next week at my lab and there are 3 more steps to finished product plus final purification.


So good news and bad news everyone... The good news is that the CUSTOM SYNTHESIS is well underway... The bad news is it is going to take a bit longer than originally estimated to complete for the above reason ;)

I will be sure to post further UPDATES here as and when :)

EDIT: I should add that it is quite common for TOXIC CHEMICALS, such as SODIUM CYANIDE, to be used as REAGENTS within the CUSTOM SYNTHESIS PROCESS; wherein, what is important it that the lab used is sufficiently skilled and reputable such that no traces of said TOXIC CHEMICALS remain in the FINAL PRODUCT (which can always be confirmed via independent third party analysis) ;)


If you need it quickly, you may want to just order it from NSN: http://www.newstarno....com/prl853.php since you are going to really be pushing it if you wait for your delivery from SG.

#1527 ScienceGuy

  • Life Member
  • 851 posts
  • 1,131
  • Location:UK

Posted 02 December 2013 - 05:25 PM

UPDATE:

Hi Everyone,

I just received word back from the lab; this is what they have said:

I'm sorry for being late again but I must be 100% sure about quality of chemicals we provide, I hope we finish this week.


I asked them what was the cause of the delay and they confirmed that they have in fact carried out the synthesis twice as the first batch did not pass their strict quality control protocol, so they discarded it. They have informed me that are confident the second batch should do so. It is apparently a difficult substance to synthesize and because SODIUM CYANIDE is used as a reagent it is obviously extremely important that the synthesis and purification processes are carried out properly and thoroughly. So hopefully not long now! :)
  • like x 3

#1528 Nattzor

  • Guest
  • 549 posts
  • 103
  • Location:Sweden

Posted 02 December 2013 - 05:31 PM

UPDATE:

Hi Everyone,

I just received word back from the lab; this is what they have said:

I'm sorry for being late again but I must be 100% sure about quality of chemicals we provide, I hope we finish this week.


I asked them what was the cause of the delay and they confirmed that they have in fact carried out the synthesis twice as the first batch did not pass their strict quality control protocol, so they discarded it. They have informed me that are confident the second batch should do so. It is apparently a difficult substance to synthesize and because SODIUM CYANIDE is used as a reagent it is obviously extremely important that the synthesis and purification processes are carried out properly and thoroughly. So hopefully not long now! :)


Nice update. Can you tell me how much you payed for how many g? Will be nice to see a few more people using it.


Also recommending everyone to report this thread (first post) so they can change the topic to PRL-8-53.

#1529 sparkk51

  • Guest
  • 418 posts
  • 36
  • Location:TX, US

Posted 02 December 2013 - 10:13 PM

UPDATE:

Hi Everyone,

I just received word back from the lab; this is what they have said:

I'm sorry for being late again but I must be 100% sure about quality of chemicals we provide, I hope we finish this week.


I asked them what was the cause of the delay and they confirmed that they have in fact carried out the synthesis twice as the first batch did not pass their strict quality control protocol, so they discarded it. They have informed me that are confident the second batch should do so. It is apparently a difficult substance to synthesize and because SODIUM CYANIDE is used as a reagent it is obviously extremely important that the synthesis and purification processes are carried out properly and thoroughly. So hopefully not long now! :)


They should have just given me the first batch. Just kidding. :-D

sponsored ad

  • Advert
Click HERE to rent this advertising spot for BRAIN HEALTH to support LongeCity (this will replace the google ad above).

#1530 hacked

  • Guest
  • 67 posts
  • -5
  • Location:United States

Posted 03 December 2013 - 01:06 AM

Just wanted to let everyone know that I know of a trusted lab that finished synthesizing PRL-8-53, NSI-189 and IDRA-21... If anyone is interested in any of these compounds please email me at founder@gafoundations.org with how many grams you want... if I get enough people who are interested in PRL & IDRA I'll send out invoices. Though, I am definitely buying a large batch of NSI this week, so if you want me to send you some just get in touch!!

Edited by veritatis, 03 December 2013 - 01:09 AM.





52 user(s) are reading this topic

0 members, 52 guests, 0 anonymous users